you are here: Home Tool Holders MAS403 BT
categories Tool Holders Bushing Accessories Non-Standard Tooling HSK ● T
Products
Hydraulic Chuck MAS403
Brand: BRIGHT-TOOLS
contact now
  • Specification
  • Simple figure
  • Precautions

Size d D D1 L L1 L2 Screw
BT30-HY06-70 6 26 44.5 70 29.5 27 M5x0.8
BT30-HY08-70 8 28 44.5 70 30 27 M6x1.0
BT30-HY10-75 10 30 44.5 75 31 32 M8x1.0
BT30-HY12-85 12 32 45 85 45 37 M10x1.0
BT30-HY14-85 14 34 45 85 45 37 M10x1.0
BT30-HY16-90 16 38 45 90 50 42 M10x1.0
BT30-HY18-90 18 40 45 90 50 42 M10x1.0
BT30-HY20-90 20 42 45 90 50 42 M6x1.0
BT40-HY06-90 6 26 44.5 90 43 27 M5x0.8
BT40-HY08-90 8 28 44.5 90 44.5 27 M6x1.0
BT40-HY10-90 10 30 44.5 90 44.5 32 M8x1.0
BT40-HY12-90 12 32 44.5 90 44.5 37 M10x1.0
BT40-HY14-90 14 34 44.5 90 44.5 37 M10x1.0
BT40-HY16-90 16 38 44.5 90 47.5 42 M12x1.0
BT40-HY18-90 18 40 44.5 90 47.5 42 M12x1.0
BT40-HY20-90 20 42 44.5 90 47.5 42 M16x1.0
BT40-HY25-100 25 50 60 100 47.5 48 M16x1.0
BT40-HY32-105 32 60 - 105 - 55 M16x1.0
BT50-HY06-90 6 26 44.5 90 34 27 M5×0.8
BT50-HY08-90 8 28 44.5 90 34 27 M6×1.0
BT50-HY10-90 10 30 44.5 90 34 32 M8×1.0
BT50-HY12-90 12 32 44.5 90 34 37 M10×1.0
BT50-HY14-90 14 34 44.5 90 34 37 M10×1.0
BT50-HY16-90 16 38 44.5 90 34 42 M12×1.0
BT50-HY18-90 18 40 44.5 90 34 42 M12×1.0
BT50-HY20-90 20 42 44.5 90 34 42 M16×1.0
BT50-HY25-105 25 57 63 105 52 48 M16×1.0
BT50-HY32-115 32 64 75 115 62 55 M16×1.0


The hydraulic collet shank is very different from the traditional one, only one pressure bolt is used for tightening. When the bolt is tightened, the piston seal is pushed to create a hydraulic oil pressure in the handle, which is evenly transmitted from all sides (360°) to the steel expansion sleeve, and the expansion wall clamps the tool.

Different tools can be held by hydraulic collet, no other auxiliary tools are required.

Leave a message

Copyright © 2022 Shandong Jinjie Machinery Co.,LTD.All Rights Reserved. Powered by dyyseo.com