-
Contact us
- Office Address: 253000, Chongde 5th Avenue, Gaotie New District, Dezhou, China
- Tel: +86-534-8127588
- Mob: +86-18865728871
- Email: sales@bright-tools.com
- Skype: sdjinjie101
Model | D | d1 | d2 | d3 | d4 | d5 | d6 | d7 | l1 | l2 | l3 | l4 | l5 | e1 | e2 |
SK30 | 50 | 31.75 | 59.3 | 44.3 | 45 | 13 | 16.1 | 4 | 47.8 | 24 | 19 | 16.4 | 15 | 21 | 5 |
SK40 | 63.55 | 44.45 | 72.3 | 56.25 | 50 | 17 | 16.1 | 4 | 68.4 | 32 | 25 | 22.8 | 18.5 | 27 | 5 |
SK50 | 97.5 | 69.85 | 107.25 | 91.25 | 80 | 25 | 25.7 | 6 | 101.8 | 47 | 37.7 | 35.5 | 30 | 42 | 7 |
ISO30, ISO40, ISO50, SK30, SK40, SK50 Tool Holders
Manufactured from alloy steel with good core strength and long wear life.
Tool Holder Standard is DIN 69871 SK.
Toolholder Taper ground to AT3 or better accuracy standard for maximum contact with spindle.
-
SK Shrink Chuck Taper
The same shrink fit tool holder blank can be installed with separate extension rods of different diameters/lengths.
-
DIN69871 SK Collet Chuck
DIN69871 SK Collet Chuck is for Clamping Tools with Straight Shank in Collets DIN6499 -
ER Collet Chuck with Mini Nut
DIN69871 Collet Chuck with Mini Nuts are for Clamping Tools with Straight Shank in Collets DIN6499 -
Collet Chuck without Drive Slots
Collet Chuck without Drive Slots are for Woodworking Industry. -
OZ Collet Chuck DIN6391
DIN69871 OZ Collet Chuck is for clamping tools with straight shank in collets DIN6388 -
Weldon End Mill Holder
Weldon Holder is for clamping tools with straight shank and inclined flat DIN1835-B -
Weldon Holder with Coolant Channels
End mill holders DIN 6359 with coolant channels for end mills DIN 1835-B -
Morse Taper Adapter DIN6383
Adaptor sleeves for MT with tang DIN 6383 is for mounting tools with Morse taper shank and tang according to DIN 228-1 form B. -
Morse Taper Adapter DIN6364
Adaptor sleeves for MT with drawbar thread DIN 6364 are for clamping tools with Morse taper shank and thread according to DIN 228-1 form A. -
Sleeve Adapter
DIN69871 Sleeve Adapter is for mounting tapers according to DIN 69871,JIS B 6339 and DIN 2080.