BT-SKS Collet Chuck is very good at for high speed processing especially for electronic workpiece processing
1. The nut is designed in a full round, with small wind resistance and low noise, G2.5/25000 RPM ensure stable high-speed processing
2. The collet adopts a unilateral 4° design, which bring higher repeat clamping accuracy.
3. Slim body compared with ER collets, has stronger air avoidance.
| Size | D | D1 | L | Capacity | M |
| BT30-SKS10-60 | 27.5 | 27.1 | 60 | 2-10 | M21.5*1 |
| BT30-SKS16-60 | 40.6 | 40 | 60 | 3-16 | M32*1.5 |
| BT30-SKS10-90 | 27.5 | 27.1 | 90 | 2-10 | M21.5*1 |
| BT30-SKS16-90 | 40.6 | 40 | 90 | 3-16 | M32*1.5 |
| BT40-SKS10-60 | 27.5 | 27.1 | 60 | 2-10 | M21.5*1 |
| BT40-SKS16-70 | 40.6 | 40 | 70 | 3-16 | M32*1.5 |
| BT40-SKS10-90 | 27.5 | 27.1 | 90 | 2-10 | M21.5*1 |
| BT40-SKS16-90 | 40.6 | 40 | 90 | 3-16 | M32*1.5 |
| BT40-SKS20-90 | 48.5 | 48 | 90 | 2-20 | M40*1 |
| BT40-SKS25-90 | 55.6 | 55 | 90 | 6-25 | M45*1.5 |
| BT40-SKS10-120 | 27.5 | 27.1 | 120 | 2-10 | M21.5*1 |
| BT40-SKS16-120 | 40.6 | 40 | 120 | 3-16 | M32*1.5 |
| BT40-SKS20-120 | 48.5 | 48 | 120 | 2-20 | M40*1 |
| BT40-SKS25-120 | 55.6 | 55 | 120 | 6-25 | M45*1.5 |
| BT50-SK10-100 | 27.5 | 27.1 | 100 | 2-10 | M21.5*1 |
| BT50-SK16-100 | 40.6 | 40 | 100 | 3-16 | M32*1.5 |
| BT50-SKS10-120 | 27.5 | 27.1 | 120 | 2-10 | M21.5*1 |
| BT50-SKS16-120 | 40.6 | 40 | 120 | 3-16 | M32*1.5 |
| BT50-SKS10-165 | 27.5 | 27.1 | 165 | 2-10 | M21.5*1 |
| BT50-SKS16-165 | 40.6 | 40 | 165 | 3-16 | M32*1.5 |
English 
日本語 
한국어 
Deutsch 
Español 
italiano 
русский 
tiếng việt 
Türkçe 
português 
فارسی 
zh-CN
